verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-20SB

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-20SB is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 50 to 70 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke70 mm
  • Adjustable range50–70 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$45.35 $52.85Save 14% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-20SB

The AirTAC SDAJ20X70-20SB is a compact double-acting double-rod cylinder built for applications requiring exact extend positioning. An external M6x1.0 adjuster screw lets you dial the forward stop from 50 to 70 mm directly on the machine, eliminating the need for shims or part swaps.

This variant includes a built-in piston magnet (-S) for AirTAC reed or electronic switches and a male M6x1.0 threaded rod end (-B). The short riveted body minimizes axial mounting depth where space is tight. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-20SB Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-20SB
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke70 mm
Adjustable range50 – 70 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-20SB

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×70Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-20SB Is Used

precision_manufacturing

Trial Positioning Stops

Dial the M6x1.0 screw to find the exact 50-70 mm extend point for prototype parts before locking down the final mechanical stop.

sync_alt

Rapid Changeover Lines

Adjust the extend depth on-site without swapping cylinders when shifting between product families, saving valuable changeover minutes.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-20SB the Right Cylinder?

When sizing this 20 mm bore actuator, evaluate your force requirements both ways. Choose this specific model if your fixture setup demands on-machine stroke tuning within the 50-70 mm window.

Verify your system parameters: 70 mm maximum stroke, 20 mm adjustability, M5x0.8 port, male M6x1.0 rod thread, and the included magnet for sensing. Note that a standard compact cylinder does not hold position upon air loss; the fixed bumper only decelerates near the end of travel. For load holding without live pressure, install an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 50–70 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-20SB FAQ

The theoretical maximum push is 32 kgf at 1.0 MPa. Operating pressure ranges from 0.15 to 1.0 MPa, with a speed of 30-500 mm/s.

The external R (M6x1.0) screw shortens the extend stroke by up to 20 mm, allowing you to set the forward stop anywhere between 50 and 70 mm. The -S code indicates a built-in piston magnet compatible with AirTAC reed or electronic solid-state switches mounted in the body grooves.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-20SB

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X70-20SB and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.