verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-30

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-30 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 40 to 70 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke70 mm
  • Adjustable range40–70 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$38.37 $45.87Save 16% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-30

The AirTAC SDAJ20X70-30 is a double-acting compact cylinder featuring an external adjustable extend stop. Turning the R (M6x1.0) screw lets you dial the outward stroke anywhere between 40 and 70 mm directly on the machine, avoiding part swaps during setup. The retract distance remains full.

The short riveted body saves axial mounting depth where larger profile cylinders will not fit. End shock is handled by a fixed NBR bumper, not an adjustable air cushion.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-30 Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-30
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke70 mm
Adjustable range40 – 70 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-30

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×70Maximum stroke length in mm.
-30Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-30 Is Used

straighten

Gauge Probe Setup

Dial the extend stop from 40 to 70 mm to hit test probes precisely without machining new spacers.

view_module

Compact Ejector

Fit the short riveted body into tight tooling plates to push lightweight parts out of molds safely.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-30 the Right Cylinder?

Choose this specific 40-70 mm adjustable range if your fixture requires frequent trial positioning. It uses an M5x0.8 port, a female M4x0.7 rod thread, and lacks a magnet. A plain cylinder does not hold a load on air loss; add an external rod lock or pilot-operated check valve if you need true position holding.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 40–70 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-30 FAQ

The theoretical maximum push is 32 kgf at 1.0 MPa.

The R (M6x1.0) screw mechanically shortens the extend end position from the 70 mm maximum down to 40 mm. This SKU ships without a piston magnet; you must select the -S option to use reed or electronic switches.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-30

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X70-30 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.