
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-40 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 30 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X70-40 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M6x1.0) screw, you shorten the forward stroke on-site, dialling the rod end anywhere between 30 and 70 mm without swapping shims or parts.
Its short riveted body saves axial mounting depth where round-body or profile units will not fit. The bore sets the piston rod at 8 mm with an M5x0.8 air port and a female M4x0.7 rod-end thread. End shock is handled by a fixed NBR bumper that decelerates the stroke, though it is not an adjustable air cushion or a lock.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 70 mm |
| Adjustable range | 30 – 70 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Re-adjust the mechanical stop on the fly for different package sizes without changing cylinder hardware, relying on the fixed NBR bumper for end deceleration.
Choose this exact model when your fixture requires on-site stroke tuning across a 30-70 mm window.
Confirm the 70 mm maximum stroke, 40 mm adjust window, M5x0.8 port, and female M4x0.7 rod thread suit your manifold and tooling. This SKU lacks a piston magnet, so it cannot take a magnetic switch; specify the -S variant if you need reed or electronic sensing. A plain cylinder does not hold its load on air loss or valve centring, so deploy an external rod lock or pilot-operated check valve for suspended loads.
Quick checklist
The theoretical maximum push is 32 kgf at 1.0 MPa.
Turning the R (M6x1.0) screw shortens the extend end position by up to 40 mm, giving a usable forward range of 30 to 70 mm. The screw sets the mechanical stop and does not alter the cylinder's force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.