
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-50 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 20 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X70-50 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the M6x1.0 adjuster screw, you can dial the forward stroke anywhere between 20 and 70 mm directly on the machine without swapping shims or parts.
This thin riveted-body design saves valuable axial mounting depth where larger profile or round-body units will not fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic sensing without upgrading to the -S variant.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-50 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 70 mm |
| Adjustable range | 20 – 70 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 70 mm down to 20 mm via the M6x1.0 screw to accommodate varying part lengths on machining fixtures without fabricating new spacers.
Set precise probe engagement depths for trial runs. The fixed NBR bumper ensures repeatable end stops without requiring complex reprogramming of motion controllers.
Choose this model if your fixture requires frequent on-site stroke tuning between 20 and 70 mm during product changeovers.
Confirm your required extend window, the M5x0.8 air port, and the female M4x0.7 rod-end thread. Keep in mind that a plain cylinder does not hold position or load when air is lost or the valve is centered—the fixed bumper only decelerates near the end of travel. For load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The external R (M6x1.0) screw mechanically shortens the forward stroke by up to 50 mm, allowing usable extends between 20 and 70 mm. This specific SKU has no piston magnet; to use reed or electronic switches, you must select the -S magnet option.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.