
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-50S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 20 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X70-50S is a compact double-acting double-rod cylinder featuring an external extend stop. An M6x1.0 adjuster screw lets you dial the outward stroke anywhere between 20 and 70 mm directly on your machine, eliminating the need for shims or part swaps during changeovers. Retract travel remains full length.
The short riveted body minimizes axial footprint where space is tight. This unit includes a built-in piston magnet for AirTAC reed or electronic switches, while fixed NBR bumpers absorb end-of-stroke shock.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-50S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 70 mm |
| Adjustable range | 20 – 70 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact extend stop between 20 and 70 mm during prototype runs to find the optimal push depth before locking down your fixture.
Swap product variants rapidly by turning the M6x1.0 adjuster screw to reposition the 157.1 N extend endpoint without changing cylinder hardware.
When sizing this 20 mm bore actuator, evaluate your force needs against its neighbors.
Choose this specific configuration if your fixture requires frequent on-site stroke tuning across a 20-70 mm window. It features an M5x0.8 port and a female M4x0.7 rod-end thread. Remember that a plain cylinder does not hold position if air pressure drops or the valve centers; integrate an external rod lock or pilot-operated check valve for secure load holding. The included -S magnet enables position sensing.
Quick checklist
The theoretical maximum push is 32 kgf at 1.0 MPa.
The built-in -S magnet works with AirTAC reed or electronic solid-state switches for position feedback.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.