
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-75SB is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 0 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X70-75SB is a compact double-acting double-rod cylinder featuring an external extend stop. By turning the R (M6x1.0) adjuster screw, you can dial the forward stroke from 0 to 70 mm directly on your equipment, avoiding any part swaps.
This variant includes a built-in piston magnet (-S) for AirTAC reed or electronic switches, and a male M6x1.0 threaded rod end (-B) instead of the default female M4x0.7. The short riveted body drastically cuts axial mounting depth where round-body or profile cylinders cannot fit. End shock is managed solely by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-75SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 70 mm |
| Adjustable range | 0 – 70 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 70 mm via the M6x1.0 screw during machine setup, accommodating varying jig heights without swapping hardware.
Secure the male M6x1.0 rod to a test probe and gradually adjust the mechanical stop to find the exact sensing distance before finalizing a fixture.
Choose this 20 mm bore when your application requires on-site stroke tuning within tight spatial constraints.
Confirm your parameters: 20 mm bore, 70 mm maximum stroke, 75 mm adjustment window, M5x0.8 port, male M6x1.0 rod thread, and a magnetic piston. Remember that a plain cylinder does not hold position on air loss or valve centering—the piston drifts and the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
It operates between 0.15 and 1.0 MPa, tolerates proof pressures up to 1.5 MPa, and runs at speeds of 30-500 mm/s.
The R (M6x1.0) screw shortens the extend stop by up to 75 mm, allowing usable forward travel from 0 to 70 mm without altering the force output. The built-in magnet (-S) enables position detection using AirTAC reed or electronic solid-state switches mounted in the body grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.