
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-10 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 65 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X75-10 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M6x1.0 adjuster screw lets you dial the forward end-position anywhere between 65 and 75 mm directly on the machine, eliminating the need for shims or part swaps during changeovers. Retract remains at the full 75 mm.
The short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. End shock is managed strictly by a fixed NBR bumper, which decelerates the stroke but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 75 mm |
| Adjustable range | 65 – 75 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 65-75 mm extend stop during initial tooling commissioning to precisely set contact depth without machining custom spacers.
Fine-tune the exact 8 kg vertical clamping distance between runs, taking advantage of the compact body to fit tight test benches.
This model is specified without a piston magnet, so it cannot host reed or electronic switches; add the -S code if sensing is required. The rod end features a female M4x0.7 thread on an 8 mm rod, with an M5x0.8 air port. Remember that the fixed bumper and mechanical stop do not secure the load on air loss; for vertical holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ20 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj20-adjustable-cylinder
Quick checklist
It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
Turning the M6x1.0 R screw shortens the extend stroke by up to 10 mm, giving a usable range of 65 to 75 mm. This specific SKU lacks the -S magnet option, meaning it cannot accept AirTAC reed or electronic switches; choose the -S variant if position feedback is required.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.