
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-30S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 45 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X75-30S is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjustment screw that lets you dial the extend stop anywhere between 45 and 75 mm directly on the machine.
Its short riveted body drastically reduces axial mounting depth compared to traditional round-body or profile alternatives, fitting easily into tight assemblies. The integrated -S piston magnet supports AirTAC reed or electronic switches for end-position confirmation, while fixed NBR bumpers absorb end-of-stroke shock without acting as adjustable cushions or locks.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 75 mm |
| Adjustable range | 45 – 75 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend position from 45 to 75 mm on the fly to accommodate different material widths without machining new stop blocks.
Quickly reposition the 157.1 N extend endpoint during product family transitions to minimize setup downtime on packaging lines.
Leverage the M6x1.0 adjuster screw to fine-tune the exact extension length during prototype testing before locking down final dimensions.
If your application requires less force, stepping down to the SDAJ16 provides 100.5 N at 0.5 MPa, whereas moving up to the SDAJ25 yields 245.4 N for heavier demands.
This model is ideal for operators needing frequent on-machine stroke tuning during changeovers, but remember that a plain cylinder drifts when air is lost or the valve is centered. For load holding without live pressure, you must integrate an external rod lock or pilot-operated check valve. Confirm your bore (20 mm), stroke (75 mm), window (30 mm), M5x0.8 port, -S magnet, and female M4x0.7 rod thread before ordering.
Quick checklist
The theoretical maximum push is 32 kgf at 1.0 MPa.
Turning the external R screw shortens the extend stroke by up to 30 mm, giving a usable range of 45 to 75 mm without changing parts. The -S option includes a built-in piston magnet designed to trigger AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.