
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-30SB is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 45 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X75-30SB is a compact double-acting double-rod cylinder built for on-machine extend tuning. An external M6x1.0 adjuster screw lets you dial the forward stop anywhere between 45 and 75 mm without swapping shims or parts.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M6x1.0 rod thread. The short riveted body minimizes axial mounting depth where space is tight. End-of-travel shock is handled by a fixed NBR bumper that decelerates the piston, though it is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 75 mm |
| Adjustable range | 45 – 75 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the M6x1.0 screw to find the exact 45-75 mm extend point for a new machining fixture before locking it down.
Quickly reset the forward stop depth for different box sizes on a packing line without changing hardware.
When sizing this 20 mm bore actuator, evaluate both neighboring bores. Choose this specific model if your fixture requires precise forward positioning during commissioning or frequent product changeovers.
Confirm your requirements for bore, 75 mm max stroke, 30 mm adjust window, M5x0.8 port, male M6x1.0 rod, and the integrated magnet. Remember that a standard compact cylinder drifts when air is lost or the valve centers; the fixed bumper only decelerates near the end and the R screw is a stop, not a lock. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 32 kgf at 1.0 MPa.
The external R (M6x1.0) screw shortens the extend end position from the 75 mm maximum down to 45 mm. The included -S magnet allows tracking with AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.