verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-40S

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-40S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 35 to 75 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke75 mm
  • Adjustable range35–75 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$47.42 $54.92Save 13% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-40S

The AirTAC SDAJ20X75-40S is a compact double-acting double-rod cylinder featuring an on-site extend stop. A side-mounted M6x1.0 adjuster screw lets you dial the forward stroke anywhere between 35 and 75 mm without swapping shims or parts.

This thin riveted-body design saves valuable axial mounting depth where larger profile cylinders cannot fit. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Equipped with a built-in piston magnet (-S), the unit supports AirTAC reed or electronic solid-state switches directly in the body grooves.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-40S Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-40S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke75 mm
Adjustable range35 – 75 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-40S

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×75Maximum stroke length in mm.
-40Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-40S Is Used

precision_manufacturing

Tooling Changeover

Dial the extend stop from 35 to 75 mm during fixture swaps, avoiding the need to manufacture custom spacer rings for varying part heights.

science

Lab Positioning

Trial-position sample probes by turning the M6x1.0 screw to find the exact 35-75 mm contact depth before locking down the sequence.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-40S the Right Cylinder?

It is the right pick for setups needing frequent on-machine stroke tuning across a 35-75 mm window.

Confirm the bore, 75 mm maximum stroke, 40 mm adjust window, and M5x0.8 port. This variant includes the magnet option (-S) and a female M4x0.7 rod-end thread. Note that a plain cylinder does not hold a load if air pressure drops or the valve centers; the bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 35–75 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-40S FAQ

The theoretical maximum push is 32 kgf at 1.0 MPa.

The external screw shortens the forward stroke by up to 40 mm, allowing any extend position between 35 and 75 mm; retract remains full. The -S code means a built-in magnet is included for sensing position with AirTAC reed or electronic switches.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-40S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X75-40S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.