
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-40SB is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 35 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X75-40SB is a compact double-acting double-rod cylinder built for on-site extend tuning. An external M6x1.0 adjuster screw lets you dial the forward stop anywhere between 35 and 75 mm without swapping shims or parts.
The short riveted body saves axial mounting depth where round-body or profile units will not fit. This specific configuration includes a built-in piston magnet for AirTAC reed or electronic switches and a male M6x1.0 piston rod end. A fixed NBR bumper decelerates the stroke end, operating at speeds from 30 to 500 mm/s.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-40SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 75 mm |
| Adjustable range | 35 – 75 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Tune the forward stroke on-site during product changeovers without part swaps, leveraging the compact riveted body to save axial depth.
Choosing this 20 mm bore balances output and footprint.
Opt for the SDAJ20X75-40SB when setups demand frequent changeovers or trial positioning. Confirm the 75 mm max stroke, 40 mm window, M5x0.8 port, male M6x1.0 rod, and the magnet option. Remember that a plain cylinder drifts on air loss; the bumper only decelerates. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 32 kgf at 1.0 MPa.
The M6x1.0 adjuster screw shortens the extend stop by up to 40 mm, yielding a usable 35 to 75 mm forward range. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.