
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-50S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 25 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X75-50S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M6x1.0 adjuster screw lets you dial the extend position anywhere between 25 and 75 mm directly on the machine, eliminating the need for shims or part swaps during changeovers. Retract remains at the full 75 mm stroke.
The short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. End-of-stroke deceleration is handled by a fixed NBR bumper, and the built-in magnet (-S) supports AirTAC reed or electronic solid-state switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-50S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 75 mm |
| Adjustable range | 25 – 75 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact extend stop between 25 and 75 mm during prototype runs. The M6x1.0 screw allows minute position tweaks without disassembling the fixture.
Adapt a sorting gate for different package sizes on the fly.
Set the precise extend height via the external screw, knowing the fixed NBR bumper will cushion the end of travel.
When sizing this 20 mm bore unit, consider the neighbouring capacities at 0.5 MPa. Choose this model if your fixture requires frequent on-site stroke tuning within the 25-75 mm window.
Confirm the bore (20 mm), total stroke (75 mm), adjustment window (50 mm), and M5x0.8 port. The -S code indicates the integrated magnet for position sensing, and the female M4x0.7 rod-end thread suits standard mounting clevises. Remember that a plain cylinder does not hold a load if air pressure drops or the valve centres; the fixed bumper only decelerates the stroke end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.7 MPa, push increases to 219.9 N. The theoretical maximum push is 32 kgf at 1.0 MPa.
The M6x1.0 R screw shortens the extend stroke by up to 50 mm, giving a usable extend range of 25-75 mm. The integrated -S magnet allows tracking by AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.