verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-75S

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-75S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 0 to 75 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke75 mm
  • Adjustable range0–75 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$47.42 $54.92Save 13% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-75S

The AirTAC SDAJ20X75-75S is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjustment screw that dials the extend stop from 0 to 75 mm directly on your machine. Retract travel stays at the full 75 mm regardless of the extend setting.

Its short riveted body drastically reduces axial mounting depth where round-body or profile cylinders cannot fit. The unit relies on a fixed NBR bumper at each end to decelerate the stroke, meaning it is not an adjustable air cushion. Equipped with a built-in piston magnet, this variant supports AirTAC reed or electronic switches for precise end-position sensing.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-75S Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-75S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke75 mm
Adjustable range0 – 75 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-75S

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×75Maximum stroke length in mm.
-75Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-75S Is Used

straighten

Adjustable Probe Depth

Dial the extend stop from 0 to 75 mm on the fly to test different sensor contact depths without machining new spacers.

precision_manufacturing

Trial Positioning Jigs

Set exact clamping reach during prototype runs, relying on the fixed NBR bumper to absorb the end-of-stroke shock.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-75S the Right Cylinder?

Choose this specific model if your fixture requires frequent changeovers or trial positioning within its 0-75 mm extend window.

Confirm your parameters: 20 mm bore, 75 mm maximum stroke, 75 mm adjust window, and an M5x0.8 port. The -S code denotes the integrated magnet for sensing, while the female M4x0.7 rod-end thread handles tooling attachment. Remember that a plain compact cylinder cannot hold a load if air pressure drops or the valve centers; the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ20 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj20-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 0–75 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-75S FAQ

The theoretical maximum push force is 32 kgf at 1.0 MPa.

Turning the R (M6x1.0) screw shortens the extend end position anywhere between 0 and 75 mm without changing the force. The included -S magnet works with AirTAC reed or electronic switches for position sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-75S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ20X75-75S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.