
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-75SB is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 0 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X75-75SB is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the R (M6x1.0) screw lets you dial the extend position anywhere from 0 to 75 mm directly on the machine, while the retract stroke remains full length.
This unit includes a built-in piston magnet (-S) for AirTAC reed or electronic switches and a male M6x1.0 threaded rod end (-B) instead of the default female M4x0.7. The short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-75SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 75 mm |
| Adjustable range | 0 – 75 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 75 mm to set precise insertion depths for varying panel thicknesses without swapping actuators on the line.
Turn the M6x1.0 adjuster screw to reposition the male rod end instantly during product family transitions, minimizing machine downtime.
Choose this specific model if your fixture requires frequent on-site stroke tuning or trial positioning during changeovers. Confirm your bore, 75 mm maximum stroke, 75 mm adjust window, M5x0.8 port, male M6x1.0 rod thread, and magnet requirements. Note that a plain cylinder does not hold a load if air pressure drops or the valve centers; the piston will drift. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The R (M6x1.0) screw shortens the extend stop by up to 75 mm, giving a usable extend range of 0-75 mm without changing force. The included -S magnet works with AirTAC reed or electronic solid-state switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.