
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-10B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 70 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X80-10B is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjuster screw that dials the extend stop from 70 to 80 mm directly on your machine. This thin riveted body significantly reduces axial mounting depth where larger profile or round-body units will not fit.
This specific SKU includes a male-thread M6x1.0 piston rod and lacks a piston magnet, meaning it cannot host reed or electronic switches without switching to the -S variant. End-of-stroke deceleration relies strictly on a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15 to 1.0 MPa pressure range.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 80 mm |
| Adjustable range | 70 – 80 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the M6x1.0 adjuster screw to set the exact 70-80 mm extend stop during initial tooling setup, ensuring precise contact without machining custom spacers.
Press small bearings or pins using the 8 kg vertical lift capacity, relying on the fixed NBR bumper to absorb the end shock without damaging the assembly.
Choose this specific model if your fixture requires a male M6x1.0 rod end and on-site extend tuning between 70 and 80 mm.
Confirm the 10 mm adjustment window, M5x0.8 air port, and absence of a magnet suit your control scheme. Remember that a plain cylinder does not hold its load on air loss or when the valve is centred—the piston drifts and the fixed bumper only decelerates near the stroke end. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
Turning the external R (M6x1.0) screw mechanically shortens the extend stroke by up to 10 mm, giving a usable range of 70 to 80 mm without changing parts. This specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; you must select the -S variant for sensing capabilities.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.