
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-20SB is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 60 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X80-20SB is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjuster screw that lets you dial the extend stop anywhere between 60 and 80 mm directly on the machine.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M6x1.0 piston rod thread. The short riveted body saves axial mounting depth where a larger profile cylinder will not fit. End-of-travel shock is handled by a fixed NBR bumper, which decelerates the stroke but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-20SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 80 mm |
| Adjustable range | 60 – 80 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the M6x1.0 extend screw to find the exact 60-80 mm contact point during prototype tooling setup without machining new spacers.
Set precise mechanical lower limits for light-duty pressing tasks, relying on the fixed NBR bumper to absorb the end-of-stroke impact.
Choose this specific SDAJ20X80-20SB configuration if your fixture requires on-site stroke tuning between 60 and 80 mm, a male M6x1.0 rod end, and position sensing. Confirm the 20 mm bore, 80 mm max stroke, 20 mm window, M5x0.8 port, -S magnet, and -B male thread match your assembly. Note that a plain cylinder does not hold a load on air loss; for vertical load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push force is 32 kgf at 1.0 MPa.
Turning the external R (M6x1.0) screw shortens the extend stroke by up to 20 mm, giving a usable range of 60-80 mm without changing parts. The -S code means a built-in magnet is included for direct mounting of AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.