verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-30B

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-30B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 50 to 80 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke80 mm
  • Adjustable range50–80 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$42.09 $49.59Save 15% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-30B

The AirTAC SDAJ20X80-30B is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. By turning the external M6x1.0 adjuster screw, you can dial the forward stroke anywhere between 50 and 80 mm without changing parts.

This variant features a male M6x1.0 piston rod thread and lacks a piston magnet. The short riveted body drastically reduces axial mounting depth where round-body or profile cylinders will not fit. End shock is managed solely by a fixed NBR bumper, which decelerates the piston near the end of travel but is not an adjustable air cushion.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-30B Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-30B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke80 mm
Adjustable range50 – 80 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-30B

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×80Maximum stroke length in mm.
-30Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-30B Is Used

precision_manufacturing

Tooling Changeover

Dial the M6x1.0 extend stop between 50 and 80 mm during machine changeovers to accommodate different fixture heights without fabricating new spacers.

science

Trial Positioning

Use the 30 mm adjustment window to fine-tune the end-of-stroke location during prototyping, finding the optimal contact point before locking the screw.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-30B the Right Cylinder?

When sizing this unit, consider the neighboring bores to ensure optimal performance. Choose this 20 mm bore if your application requires precise extend positioning within the 50-80 mm window.

This specific SKU includes the male-thread M6x1.0 rod (-B) and no magnet, meaning it cannot accept reed or electronic switches. Note that a plain cylinder does not hold its load upon air loss or valve centering; the piston drifts, and the fixed bumper only decelerates near the stroke end. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve. Confirm your required port size (M5x0.8 for this bore) before finalizing the setup.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 50–80 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-30B FAQ

The theoretical maximum push force is 32 kgf at 1.0 MPa.

The external R (M6x1.0) screw mechanically limits the extend stroke, allowing you to set the forward travel anywhere from 50 to 80 mm. This SKU features a male M6x1.0 piston rod thread and no piston magnet, so magnetic switches cannot be used.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-30B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X80-30B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.