
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-30SB is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 50 to 80 mm on the machine — no shims, no part change.
The SDAJ20X80-30SB is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjustment screw that dials the extend stop from 50 to 80 mm directly on your machine.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M6x1.0 piston rod end. The short riveted body saves axial mounting depth where round-body or profile cylinders will not fit, while a fixed NBR bumper decelerates the stroke end without acting as a lock.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 80 mm |
| Adjustable range | 50 – 80 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 50 and 80 mm to find the exact contact point for prototype parts, locking the M6x1.0 screw once the ideal geometry is reached.
Switch product formats by turning the external adjuster to shorten the extend position, avoiding part swaps while the male M6x1.0 rod drives the tooling.
Choose this specific model if your fixture requires frequent on-site stroke tuning between 50 and 80 mm. Confirm your setup needs the male M6x1.0 rod thread, the M5x0.8 port, and the -S magnet for switch sensing. Remember that a plain cylinder drifts when air is lost or the valve is centred; the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
It operates at 30-500 mm/s between -20 and +70 C.
Turning the R M6x1.0 screw shortens the maximum 80 mm extend stroke down to 50 mm without changing the force. The included -S magnet works with AirTAC reed or electronic switches mounted in the body grooves for end-of-travel sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.