verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-40

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-40 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 40 to 80 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke80 mm
  • Adjustable range40–80 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$42.09 $49.59Save 15% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-40

The AirTAC SDAJ20X80-40 is a compact double-acting double-rod cylinder featuring an external extend stop. A front M6x1.0 adjuster screw lets you dial the outward stroke down by up to 40 mm directly on the machine, yielding a usable extend range of 40 to 80 mm without swapping shims or parts. Retract remains at the full length.

This riveted-body unit saves valuable axial mounting depth where round-body alternatives will not fit, and it operates at 30-500 mm/s. End shock is handled by a fixed NBR bumper rather than an adjustable air cushion. This specific SKU ships without a piston magnet, so it cannot accept reed or electronic switches; choose the -S variant if you require position sensing.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-40 Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-40
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke80 mm
Adjustable range40 – 80 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-40

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×80Maximum stroke length in mm.
-40Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-40 Is Used

straighten

Adjustable Push Stops

Dial the extend position from 40 to 80 mm on the fly for trial positioning of delicate probes without machining new spacers.

precision_manufacturing

Compact Assembly Stations

Leverage the short riveted body to fit tight axial spaces while using the M6x1.0 screw to fine-tune part seating depth.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-40 the Right Cylinder?

Choose this 80 mm stroke with the 40 mm window for lines requiring frequent format changeovers or trial positioning.

Remember that a plain SDAJ does not hold a load when air is lost or the valve centers—the piston drifts, as the fixed bumper only decelerates near the end of travel. For load holding without live pressure, install an external rod lock or a pilot-operated check valve. Confirm your bore, 80 mm maximum stroke, 40 mm adjust window, M5x0.8 port, female M4x0.7 rod thread, and lack of magnet for this configuration.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 40–80 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-40 FAQ

Operating speed ranges from 30 to 500 mm/s.

The M6x1.0 screw mechanically shortens the extend stop by up to 40 mm, giving an on-site range of 40 to 80 mm; it does not alter force or lock mid-stroke. This specific SKU lacks a piston magnet, so it cannot take a switch—you must select the -S option for reed or electronic sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-40

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X80-40 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.