verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-75B

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-75B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 5 to 80 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke80 mm
  • Adjustable range5–80 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$42.09 $49.59Save 15% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-75B

The AirTAC SDAJ20X80-75B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M6x1.0 adjuster screw lets you dial the outward stroke down from the 80 mm maximum to as low as 5 mm directly at the machine, entirely eliminating the need for shims or part swaps.

This thin riveted-body design saves valuable axial mounting depth where round-body or profile cylinders simply will not fit. The unit features a male M6x1.0 piston rod thread, operates at speeds between 30 and 500 mm/s, and relies on a fixed NBR bumper at each end to decelerate the stroke. Note that this specific SKU lacks a piston magnet, so it cannot accommodate magnetic switches.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-75B Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-75B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke80 mm
Adjustable range5 – 80 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-75B

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×80Maximum stroke length in mm.
-75Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-75B Is Used

straighten

Variable Length Gauging

Dial the extend stop from 5 to 80 mm via the M6 screw to test multiple part lengths on a single fixture without machining new spacers.

science

Trial Positioning Rigs

Sweep through potential extend endpoints during prototype assembly to find the exact kinematic fit, locking the M6x1.0 adjuster once optimal.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-75B the Right Cylinder?

This 20 mm bore is ideal for that specific middle ground.

Choose this model when your fixture requires frequent on-site stroke tuning during changeovers. It features an M5x0.8 air port, a 75 mm adjustment window, and a male M6x1.0 rod thread. Remember that a plain cylinder does not hold its load if air pressure drops or the valve centers—the piston will drift. For secure load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 5–80 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-75B FAQ

The theoretical maximum push is 32 kgf at 1.0 MPa.

The M6x1.0 external screw shortens the extend stroke by up to 75 mm, allowing usable outward travel between 5 and 80 mm. This SKU uses a male M6x1.0 piston rod thread and lacks the -S magnet, meaning it cannot support reed or electronic switches.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-75B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X80-75B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.