
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-75S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 5 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X80-75S is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjuster screw that dials the extend stop anywhere between 5 and 80 mm. This makes it exceptionally useful for trial positioning where you need precise end-point tuning directly on the machine without swapping shims.
Its short riveted body saves valuable axial mounting depth in tight spaces where larger profile cylinders cannot fit. The unit includes a built-in piston magnet for AirTAC reed or electronic switches, and relies on a fixed NBR bumper at each end to decelerate the stroke. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-75S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 80 mm |
| Adjustable range | 5 – 80 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 5 to 80 mm during prototype runs to find the exact 94 N contact position without machining new spacers.
Re-tune the 8 kg push stroke on a packaging line during product format changes using the M6x1.0 external screw for rapid tooling resets.
Set variable mechanical endpoints in a lab rig; the fixed NBR bumper absorbs end-shock while the magnet tracks piston travel for data logging.
Choose this specific model if your fixture requires frequent changeovers or on-site stroke tuning across a wide 5 to 80 mm extend window.
Confirm your parameters match the bore 20, full stroke 80, adjustment window 75, M5x0.8 port, and the -S magnet option for sensing. Remember that a plain cylinder does not hold its load if air pressure drops or the valve centres—the piston will drift. For load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 32 kgf at 1.0 MPa.
The M6x1.0 R screw shortens the extend stop by up to 75 mm, giving a usable extend range of 5 to 80 mm without changing parts. The built-in -S magnet works with AirTAC reed or electronic solid-state switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.