
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-10SB is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 75 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X85-10SB is a compact double-acting double-rod cylinder featuring an external extend stop. A front M6x1.0 adjuster screw lets you dial the outward travel down from the 85 mm maximum to any point between 75 and 85 mm directly at the machine, eliminating the need for shims or part swaps.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M6x1.0 piston rod end. The short riveted body conserves axial mounting depth where a larger profile cylinder will not fit. End shock is absorbed by a fixed NBR bumper rather than an adjustable air cushion. The piston rod measures 8 mm in diameter, and the air port is an M5x0.8 thread.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 85 mm |
| Adjustable range | 75 – 85 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 75 and 85 mm during prototype runs to find the exact contact point for delicate 8 kg test fixtures without machining new spacers.
Fit the short riveted body into tight machine cells to eject parts, using the male M6x1.0 rod to attach custom tooling and the 10 mm window to fine-tune the ejection reach.
Choose this specific unit if your assembly process requires frequent on-machine stroke tuning between 75 and 85 mm.
Verify your requirements against the configured options: 20 mm bore, 85 mm maximum stroke, 10 mm adjuster window, M5x0.8 port, built-in magnet for electronic or reed sensing, and a male M6x1.0 rod thread. Remember that a plain compact cylinder cannot hold a load if air pressure drops or the valve is centred; the fixed bumper only decelerates the stroke end and is not a lock. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push force is 32 kgf at 1.0 MPa.
The external M6x1.0 screw shortens the extend stop by up to 10 mm, giving a usable outward range of 75 to 85 mm without altering the force. The included -S magnet works with AirTAC reed or electronic solid-state switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.