
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-20 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 65 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X85-20 is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjustment screw that dials the extend stop directly on your machine. You can set the outward travel anywhere between 65 and 85 mm without swapping shims or parts, making end-position tuning effortless during commissioning. Retract travel remains full length.
The short riveted body drastically reduces axial mounting depth where larger profile cylinders cannot fit. End shock is managed solely by a fixed NBR bumper, which decelerates the stroke but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 85 mm |
| Adjustable range | 65 – 85 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 65 to 85 mm during product family swaps to set precise clamping depth without machining new spacers.
Fine-tune the pusher arm position on the fly to route cartons of varying widths accurately down the line.
Iterate the outward reach in small increments during R&D testing to find the exact contact point for a new sensor probe.
When sizing this 20 mm bore actuator, evaluate both neighbours by their 0.5 MPa push force: stepping down to the SDAJ16 yields 100.5 N, while moving up to the SDAJ25 provides 245.4 N. Choose this specific model if your fixture requires frequent on-site stroke tuning to accommodate varying part heights.
Confirm the 20 mm bore, 85 mm maximum stroke, 20 mm adjust window, and M5x0.8 port match your pneumatic layout. This SKU lacks a piston magnet, so it cannot accept position switches; select the -S variant if you require reed or electronic sensing. Note that a plain cylinder does not hold a load on air loss or valve centre—install an external rod lock or pilot-operated check valve for suspended loads.
Quick checklist
The theoretical maximum push is 32 kgf at 1.0 MPa.
Turning the external M6x1.0 screw shortens the extend end-position by up to 20 mm, allowing usable outward travel between 65 and 85 mm. It sets the mechanical stop and does not alter the cylinder's force output.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.