verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-30

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-30 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 55 to 85 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke85 mm
  • Adjustable range55–85 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$44.16 $51.66Save 14% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-30

The AirTAC SDAJ20X85-30 is a compact double-acting double-rod cylinder featuring an external extend stop. An M6x1.0 adjuster screw lets you dial the outward stroke down from the 85 mm maximum to 55 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.

Its short riveted body drastically cuts axial mounting depth where round-body alternatives will not fit. End shock is handled by a fixed NBR bumper rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so position sensing is not supported without the -S variant.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-30 Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-30
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke85 mm
Adjustable range55 – 85 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-30

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×85Maximum stroke length in mm.
-30Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-30 Is Used

precision_manufacturing

Tooling Changeover

Dial the extend stop between 55 and 85 mm to set new datum points on machining fixtures without fabricating new spacers.

science

Prototype Positioning

Safely test actuation endpoints on a new assembly rig, using the M6x1.0 screw to find the exact 8 kg vertical lift limit.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-30 the Right Cylinder?

Dropping down to the SDAJ16 yields 100.5 N, while stepping up to the SDAJ25 provides 245.4 N.

Choose this model if your fixture requires frequent on-site stroke tuning between 55 and 85 mm. Remember that a plain cylinder drifts when air is lost or the valve is centred; the fixed bumper only decelerates the stroke end and does not lock the load. For secure holding without live pressure, install an external rod lock or pilot-operated check valve. This unit features an M5x0.8 port, a female M4x0.7 rod thread, and no magnet.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 55–85 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-30 FAQ

The theoretical maximum push is 32 kgf at 1.0 MPa.

Turning the R (M6x1.0) screw mechanically shortens the extend stop by up to 30 mm, giving a usable outward range of 55 to 85 mm. It sets the end position without altering force, and it is not a mid-stroke lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-30

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X85-30 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.