
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-40 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 45 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X85-40 is a compact double-acting double-rod cylinder featuring an external extend stop. An M6x1.0 adjuster screw lets you dial the forward stroke down by 40 mm directly at the machine, yielding a usable extend range of 45 to 85 mm without swapping shims or parts. Retract travel remains full length.
Built with a short riveted body, this model saves axial mounting depth where round-body or profile alternatives will not fit. End-of-travel deceleration relies on a fixed NBR bumper rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches; choose an -S variant if sensing is required.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 85 mm |
| Adjustable range | 45 – 85 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the M6 screw to hit exact 45-85 mm extend positions during short-run gauge setups, avoiding part changes.
Squeeze the compact riveted body into tight prototype jigs and fine-tune the 8 kg vertical lift limit by hand.
Stepping down to SDAJ16 yields 100.5 N, whereas moving up to SDAJ25 provides 245.4 N. Choose this 45-85 mm adjustable unit for trial positioning or frequent changeover lines.
Confirm the 20 mm bore, 85 mm max stroke, 40 mm window, and M5x0.8 port. The rod end thread is female M4x0.7 (or male M6x1.0 on a -B variant). Remember that a plain cylinder drifts when air is lost or the valve centres—the fixed bumper only decelerates near the end and is never a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
At 0.5 MPa it pushes with 157.1 N and pulls with 131.9 N. At 0.7 MPa push increases to 219.9 N. The theoretical maximum push is 32 kgf at 1.0 MPa.
The R (M6x1.0) screw mechanically shortens the extend stop from 85 mm down to 45 mm. It does not alter force or lock mid-stroke. This SKU has no magnet, so add an -S suffix if you need reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.