
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-40B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 45 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X85-40B is a compact double-acting double-rod cylinder built for tight axial footprints, featuring a short riveted body that fits where larger profile variants cannot. It uses an external M6x1.0 adjuster screw to dial the extend stop directly on your machine, yielding a usable forward range of 45 to 85 mm without swapping shims or parts.
This specific SKU includes a male M6x1.0 piston rod thread (option B) and carries no piston magnet, meaning it cannot host reed or electronic switches. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Operating speed spans 30 to 500 mm/s, and the bore-fixed M5x0.8 air port keeps pneumatic plumbing compact.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 85 mm |
| Adjustable range | 45 – 85 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 45-85 mm extend stop during fixture swaps to align the male M6 rod perfectly without machining new spacers.
Use the M6x1.0 adjuster screw to fine-tune the forward reach during R&D testing before locking down a final mechanical stop.
Choose the 40 mm adjustable window if your fixture changeovers demand frequent trial positioning of the extend endpoint.
Confirm the 20 mm bore, 85 mm maximum stroke, 40 mm adjust window, M5x0.8 port, male M6x1.0 rod thread, and absence of a magnet suit your assembly. Note that a plain cylinder does not hold position or load upon air loss or valve centring—the fixed bumper only decelerates near the end and the screw is a mechanical stop, not a lock. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
Quick checklist
Turning the external R (M6x1.0) screw shortens the extend stop from the 85 mm maximum down to 45 mm. It is strictly a mechanical stop, not a mid-stroke lock, and the cylinder cannot hold a load on air loss without an external rod lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.