
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-40S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 45 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X85-40S is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjuster screw that dials the extend stop from 45 to 85 mm directly on your machine.
Its short riveted body minimizes axial mounting depth where larger profile cylinders cannot fit, while a fixed NBR bumper decelerates the stroke end. Equipped with a built-in piston magnet (-S), this unit supports AirTAC reed or electronic solid-state switches for end-of-stroke confirmation.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 85 mm |
| Adjustable range | 45 – 85 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 45 to 85 mm during prototype runs to find the exact contact point for delicate 8 kg test loads without machining new spacers.
Fit the short riveted body into tight transfer chutes and fine-tune the extend endpoint to synchronize with adjacent moving assemblies.
This model is ideal for setups requiring frequent on-site stroke tuning without changing parts. Remember that a plain cylinder does not hold position on air loss or valve centring; the fixed bumper only decelerates near the end and the R screw is a mechanical stop, not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve. Configuration: 20 mm bore, 85 mm max stroke, 40 mm window, M5x0.8 port, female M4x0.7 rod thread, and an integrated magnet.
Quick checklist
Turning the R (M6x1.0) screw shortens the extend endpoint anywhere between 45 and 85 mm without affecting force. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.