
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-40SB is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 45 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X85-40SB is a compact double-acting double-rod cylinder built for on-site extend positioning. Because the screw sets the mechanical stop rather than altering the piston area, output force remains identical to a standard SDA of this bore.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M6x1.0 rod thread. The short riveted body saves valuable axial mounting depth where round-body or larger profile units will not fit. End shock is handled by a fixed NBR bumper that decelerates the stroke, meaning it is not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15 to 1.0 MPa pressure range.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-40SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 85 mm |
| Adjustable range | 45 – 85 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 45 to 85 mm on the fly to accommodate varying part widths without fabricating new mechanical shims.
Use the M6x1.0 adjuster to find the exact 94 N contact point during prototype runs before locking down the final forward position.
Choosing this 20 mm bore means sizing against its neighbors. It is ideal for operators needing frequent on-machine stroke tuning during product changeovers.
Remember that a plain SDAJ does not hold position or load when air is lost or the valve centers; the piston drifts and the fixed bumper only decelerates near the end of travel. For load holding without live pressure, install an external rod lock or a pilot-operated check valve. This specific configuration includes the S magnet for sensing and the B option for a male M6x1.0 rod end, paired with an M5x0.8 port.
Quick checklist
Turning the R (M6x1.0) screw shortens the extend stroke by up to 40 mm, yielding a usable 45 to 85 mm forward range. The built-in S magnet works with AirTAC reed or electronic solid-state switches to confirm end positions.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.