verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-50

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-50 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 35 to 85 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke85 mm
  • Adjustable range35–85 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$44.16 $51.66Save 14% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-50

The AirTAC SDAJ20X85-50 is a compact double-acting double-rod cylinder featuring an external extend stop. An M6x1.0 adjuster screw lets you dial the forward end-position anywhere between 35 and 85 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.

Its short riveted body drastically cuts axial mounting depth where round-body or profile cylinders cannot fit. The bore is hard-anodized and uses a fixed NBR bumper at each end to decelerate the stroke. Note this specific SKU lacks a piston magnet, so it cannot support position sensing without upgrading to the -S variant.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-50 Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-50
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke85 mm
Adjustable range35 – 85 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-50

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×85Maximum stroke length in mm.
-50Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-50 Is Used

precision_manufacturing

Trial Positioning

Dial the M6 screw to find the exact 35-85 mm extend point for prototype parts before locking down the final stop.

conveyor_belt

Changeover Diverter

Quickly reset the extend distance on a packaging line when switching between different product box widths.

vertical_align_center

Short-Depth Press

Fit the compact riveted body into a tight vertical press station to deliver 157.1 N of downward force.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-50 the Right Cylinder?

Choose this model if your fixture requires frequent on-site stroke tuning across a 50 mm window.

Confirm your parameters: 20 mm bore, 85 mm maximum stroke, 50 mm adjust window, and an M5x0.8 port. This base configuration has a female M4x0.7 rod-end thread and no magnet. Remember that a plain cylinder does not hold a load if air pressure drops or the valve centers; the piston will drift. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 35–85 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-50 FAQ

The theoretical maximum push is 32 kgf at 1.0 MPa.

Turning the R (M6x1.0) screw shortens the extend stroke by up to 50 mm, allowing you to set the forward stop anywhere between 35 and 85 mm. The retract stroke remains full. This mechanism only sets the stop position and does not alter the force.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-50

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X85-50 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.