
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-75 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 10 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X85-75 is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjuster screw that dials the extend stop anywhere between 10 and 85 mm directly on your machine.
Its short riveted body drastically cuts axial mounting depth where a larger profile cylinder will not fit. End-of-travel deceleration relies on a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-75 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 85 mm |
| Adjustable range | 10 – 85 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 10 to 85 mm extend stop during prototype runs to find the optimal contact point for delicate 8 kg test fixtures.
Quickly re-adjust the stroke by up to 75 mm on packaging lines to handle different product widths without changing out hardware.
Fit the short riveted body into tight machine cells to push parts at 157.1 N, saving valuable axial depth on crowded tooling plates.
This model is ideal for setups requiring frequent on-machine stroke tuning without part swaps. Confirm your specs: 20 mm bore, 85 mm maximum stroke, 75 mm adjust window, M5x0.8 port, female M4x0.7 rod thread, and no magnet. Remember that a plain cylinder drifts if air pressure drops; the fixed bumper only decelerates near the end of travel and does not lock the load. For secure holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
Turning the R (M6x1.0) screw mechanically shortens the extend stop from the 85 mm maximum down to 10 mm without shims. This screw is a stop, not a mid-stroke lock; the cylinder will drift if air is lost. Also, this SKU has no magnet, so position sensing requires the -S variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.