verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-75B

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-75B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 10 to 85 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke85 mm
  • Adjustable range10–85 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$44.16 $51.66Save 14% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-75B

The AirTAC SDAJ20X85-75B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M6x1.0) screw, you can dial the forward stroke down by up to 75 mm directly on the machine, yielding a usable extend range of 10 to 85 mm without swapping shims or parts.

This unit saves valuable axial mounting depth where a larger profile cylinder will not fit, utilizing a short riveted body. It includes a male-thread M6x1.0 piston rod (the -B option) instead of the default female M4x0.7. End shock is managed solely by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion. Note this SKU lacks a piston magnet, so magnetic sensing is impossible without the -S variant.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-75B Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-75B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke85 mm
Adjustable range10 – 85 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-75B

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×85Maximum stroke length in mm.
-75Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-75B Is Used

precision_manufacturing

Trial Positioning Jigs

Dial the M6 adjuster screw to fine-tune the 10-85 mm extend stop during prototype runs, finding the exact contact point before locking the setup.

vertical_align_center

Vertical Lift Stops

Set a precise lower limit for an 8 kg vertical lift, relying on the mechanical stop to define the endpoint rather than the fixed bumper.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-75B the Right Cylinder?

Choose this specific model if your fixture requires frequent on-site stroke tuning between 10 and 85 mm.

Confirm the 20 mm bore, 85 mm maximum stroke, 75 mm adjust window, and M5x0.8 port. The -B code specifies the male M6x1.0 rod end, so ensure your mating clevis matches. Because a plain cylinder drifts when air is lost or the valve centers, add an external rod lock or pilot-operated check valve if you need to hold a suspended load, as the fixed NBR bumper only decelerates near the end and never locks.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 10–85 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-75B FAQ

The adjuster sets the stop position and does not alter these force values.

Turning the external R (M6x1.0) screw shortens the extend stroke by up to 75 mm, giving an on-site range of 10 to 85 mm. This specific SKU lacks a piston magnet, so it cannot take a magnetic switch; you must select the -S variant to use reed or electronic sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-75B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X85-75B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.