
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-75SB is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 10 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X85-75SB is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjustment screw that dials the extend stop anywhere between 10 and 85 mm. The short riveted body minimizes axial mounting depth, fitting easily where larger profile cylinders cannot.
This specific configuration includes a built-in piston magnet for AirTAC reed or electronic switches, along with a male M6x1.0 threaded rod end for secure external mounting. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15 to 1.0 MPa pressure range.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-75SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 85 mm |
| Adjustable range | 10 – 85 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Ideal for prototype tooling where the exact extend point is unknown. Turn the M6x1.0 screw to find the optimal 10-85 mm position without machining new spacers.
Speed up product changeovers on packaging lines by adjusting the mechanical stop on-site to match varying carton depths using the 75 mm window.
Lifts light loads up to 8 kg safely. The male M6x1.0 rod secures the tooling while the bumper decelerates the end of stroke reliably.
When sizing this 20 mm bore actuator, evaluate both neighboring options.
Choose this model when your fixture requires frequent on-machine stroke tuning during changeovers. It features a 75 mm adjustment window, an M5x0.8 port, a male M6x1.0 rod thread, and the -S magnet option. Remember that a plain cylinder does not hold position upon air loss; for load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 32 kgf at 1.0 MPa.
The external R (M6x1.0) screw shortens the extend stroke by up to 75 mm, allowing a usable range of 10-85 mm. The included -S magnet enables position sensing with AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.