
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X90-40S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 50 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X90-40S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the M6x1.0 adjuster screw, you can dial the extend position anywhere between 50 and 90 mm directly on your machine, avoiding part swaps. The retract stroke remains full length.
Its short riveted body minimizes axial footprint where space is tight. The unit relies on a fixed NBR bumper to decelerate the stroke end, not an adjustable air cushion. Because this variant includes the -S magnet, it supports AirTAC reed or electronic switches via the body sensor grooves.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X90-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 90 mm |
| Adjustable range | 50 – 90 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Turn the M6x1.0 screw to find the exact 50-90 mm extend point during short-run prototype builds without machining new spacers.
Set a precise end position for seating small bearings, letting the fixed NBR bumper absorb the final contact shock.
Choose the 90 mm stroke with a 40 mm window when you need flexible extend positioning.
Confirm your setup needs on-machine stroke tuning rather than a fixed length. Note that a plain cylinder does not hold position if air is lost or the valve centers; the bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve. This configuration includes the S magnet and a female M4x0.7 rod thread.
Quick checklist
The theoretical maximum push is 32 kgf at 1.0 MPa.
The M6x1.0 R screw mechanically shortens the extend stop from the 90 mm maximum down to 50 mm; it does not alter force. The included S magnet enables tracking with AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.