
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X90-50 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 40 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X90-50 is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjuster screw that dials the extend stop from 40 to 90 mm directly on your machine.
Its short riveted body drastically cuts axial mounting depth where round-body or profile cylinders cannot fit. End-of-stroke deceleration relies on a fixed NBR bumper, which is not an adjustable air cushion, so you must slow high-energy approaches externally. This specific SKU lacks a piston magnet and cannot host reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X90-50 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 90 mm |
| Adjustable range | 40 – 90 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Choose this exact model if your fixture requires frequent on-machine stroke tuning between 40 and 90 mm without part changes.
Confirm your parameters: 20 mm bore, 90 mm maximum stroke, 50 mm adjust window, M5x0.8 port, female M4x0.7 rod thread, and no magnet. Remember that a plain cylinder drifts when air is lost or the valve centres; the fixed bumper only decelerates near the end and acts as a mechanical stop, not a lock. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
Quick checklist
Turning the R (M6x1.0) screw shortens the extend stop anywhere from 90 mm down to 40 mm. The screw sets the stop position and does not change force; it is not a mid-stroke lock, and the cylinder will drift on air loss.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.