
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X90-50B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 40 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X90-50B is a compact double-acting double-rod cylinder featuring an external extend stop. An M6x1.0 adjuster screw lets you dial the outward travel anywhere between 40 and 90 mm directly on the machine, eliminating the need for shims or part swaps.
This unit features a male-thread M6x1.0 piston rod and a short riveted body that saves valuable axial mounting depth. It uses a fixed NBR bumper at the ends to decelerate impact rather than an adjustable air cushion. Note this specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches without changing to an -S variant.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X90-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 90 mm |
| Adjustable range | 40 – 90 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 40 to 90 mm extension for prototype tooling stations on the fly, using the M6x1.0 stop screw to fine-tune contact without fabricating new spacers.
When sizing this 20 mm bore, evaluate both neighbouring options. Choose this model when your fixture requires on-site stroke tuning across a 40 to 90 mm window.
Verify your requirements against the configured bore, 90 mm maximum stroke, 50 mm adjustability window, and M5x0.8 port. The male M6x1.0 rod thread (-B) must match your tooling plate. Remember that a plain cylinder does not hold position if air pressure drops or the valve centres; the fixed bumper only decelerates near the end of travel. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.7 MPa, push increases to 219.9 N and pull to 184.7 N. The theoretical maximum push is 32 kgf at 1.0 MPa. Adjusting the stroke does not alter these force values.
Turning the R (M6x1.0) screw shortens the extend stop by up to 50 mm, allowing usable outward travel between 40 and 90 mm. The screw acts only as a mechanical end stop, not a mid-stroke lock. The cylinder cannot hold a load if air is lost; use an external rod lock for holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.