
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X90-75 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 15 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X90-75 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M6x1.0 adjuster screw lets you dial the outward stroke down from the 90 mm maximum to as low as 15 mm directly at the machine, eliminating the need for shims or parts swapping during changeovers.
This thin riveted-body design drastically reduces axial mounting depth, fitting into tight spaces where bulkier units fail. The bore is hard-anodized and uses a fixed NBR bumper at each end to decelerate the stroke, though it is not an adjustable air cushion. Note this specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches without upgrading to an -S variant.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X90-75 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 90 mm |
| Adjustable range | 15 – 90 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Perfect for prototype assembly stations where the outward reach must be dialed precisely between 15 and 90 mm to test different part geometries without swapping hardware.
Ideal for compact conveyor diverters needing a 94 N safe working push to nudge lightweight packages, with the adjuster allowing quick changes for varying box widths.
The SDAJ20X90-75 is ideal for setups requiring frequent on-site stroke tuning across a 15 to 90 mm window.
Remember that a plain cylinder does not hold its load if air pressure drops or the valve is centered; the piston will drift, as the fixed bumper only decelerates near the end of travel and the M6 screw is a mechanical stop, not a lock. For suspended loads, specify an external rod lock or pilot-operated check valve. Confirm your bore, 90 mm max stroke, 75 mm window, M5x0.8 port, female M4x0.7 rod thread, and that no magnet is required for this build.
Quick checklist
The theoretical maximum push is 32 kgf at 1.0 MPa.
The R (M6x1.0) screw acts as a mechanical stop, allowing you to shorten the extend stroke from the 90 mm maximum down to 15 mm.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.