verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-10B

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-10B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 90 to 100 mm on the machine — no shims, no part change.

  • BoreØ25 mm
  • Max stroke100 mm
  • Adjustable range90–100 mm
  • Adjuster threadM8×1.25
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$51.61 $59.11Save 12% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ25 stroke, mounting and version on one page All SDAJ25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-10B

The AirTAC SDAJ25X100-10B is a compact double-acting double-rod cylinder featuring an external extend stop. An M8x1.25 adjuster screw lets you dial the outward stroke down by up to 10 mm directly at the machine, yielding a usable range of 90 to 100 mm without swapping parts.

This variant uses a male M8x1.25 piston rod thread and a 10 mm rod diameter. The short riveted body conserves axial mounting depth where space is tight. End shock is managed by a fixed NBR bumper rather than an adjustable air cushion, and this specific SKU lacks a piston magnet, so magnetic sensing is not supported.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-10B Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-10B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ25 mm
Max stroke100 mm
Adjustable range90 – 100 mm
Adjuster thread (R)M8×1.25
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM5×0.8 F / M8×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa206 N206 N
0.7 MPa289 N—
Max (@1.0 MPa)42 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-10B

SDAJCompact double-acting cylinder with adjustable stroke.
25Bore size in mm.
×100Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-10B Is Used

precision_manufacturing

Tooling Calibration

Dial in the exact 90 to 100 mm extend position during initial fixture setup, using the M8x1.25 adjuster to fine-tune contact without machining new spacers.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-10B the Right Cylinder?

When sizing this actuator, check your force margins both ways.

Choose this model if your fixture requires precise 90 to 100 mm outward positioning during setup. Note that the male M8 rod end and M5x0.8 port are fixed by the bore. The fixed NBR bumper decelerates the stroke end but does not lock the piston; if you need to hold a load vertically without live air pressure, add an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 90–100 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M8×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-10B FAQ

The theoretical maximum push is 50 kgf at 1.0 MPa.

Turning the external R (M8x1.25) screw shortens the extend end position anywhere from 100 mm down to 90 mm. A fixed NBR bumper absorbs end shock; it is not an adjustable air cushion, and the screw acts only as a mechanical stop, not a mid-stroke lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-10B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ25X100-10B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.