verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-30B

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-30B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 70 to 100 mm on the machine — no shims, no part change.

  • BoreØ25 mm
  • Max stroke100 mm
  • Adjustable range70–100 mm
  • Adjuster threadM8×1.25
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$51.61 $59.11Save 12% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ25 stroke, mounting and version on one page All SDAJ25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-30B

The AirTAC SDAJ25X100-30B is a double-acting compact cylinder featuring an external adjustable extend stop. A simple turn of the R (M8x1.25) adjuster screw lets you dial the outward stroke anywhere between 70 and 100 mm directly on the machine.

The short riveted body saves valuable axial mounting depth where round-body or profile cylinders will not fit. This specific SKU includes a male-threaded piston rod (M8x1.25) for direct mounting and relies on a fixed NBR bumper to decelerate the stroke end. Note that this base configuration lacks a piston magnet, so it cannot support magnetic sensing.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-30B Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-30B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ25 mm
Max stroke100 mm
Adjustable range70 – 100 mm
Adjuster thread (R)M8×1.25
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM5×0.8 F / M8×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa206 N206 N
0.7 MPa289 N—
Max (@1.0 MPa)42 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-30B

SDAJCompact double-acting cylinder with adjustable stroke.
25Bore size in mm.
×100Maximum stroke length in mm.
-30Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-30B Is Used

precision_manufacturing

Machining Clamp Tuning

Dial the extend stop between 70 and 100 mm to perfectly seat clamps on varying fixture widths without machining custom spacers.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-30B the Right Cylinder?

When sizing this unit, look both directions: stepping down to an SDAJ20 drops the 0.5 MPa push to 157.1 N, while stepping up to an SDAJ32 raises it to 402.1 N.

This model is ideal for operators who need on-site stroke tuning during frequent changeovers. Remember that a plain cylinder does not hold its load if air pressure is lost or the valve is centered—the piston will drift. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve. Confirm your bore (25 mm), full stroke (100 mm), window (30 mm), port (M5x0.8), male rod thread (M8x1.25), and lack of magnet before ordering.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 70–100 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M8×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-30B FAQ

The theoretical maximum push is 50 kgf at 1.0 MPa.

The M8x1.25 R screw mechanically shortens the extend stroke by up to 30 mm, allowing an outward range of 70 to 100 mm. It is strictly a stop, not a mid-stroke lock, and the cylinder cannot hold a load if air pressure is lost.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-30B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ25X100-30B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.