verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-50S

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-50S is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 50 to 100 mm on the machine — no shims, no part change.

  • BoreØ25 mm
  • Max stroke100 mm
  • Adjustable range50–100 mm
  • Adjuster threadM8×1.25
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$59.98 $67.48Save 11% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ25 stroke, mounting and version on one page All SDAJ25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-50S

The AirTAC SDAJ25X100-50S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the R (M8x1.25) screw lets you dial the extend end-position anywhere between 50 and 100 mm directly on the machine, eliminating the need for shims or part swaps.

The short riveted body saves valuable axial mounting depth where larger profile or round-body units will not fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Equipped with a built-in piston magnet (-S), this unit supports AirTAC reed or electronic solid-state switches mounted directly into the body sensor grooves.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-50S Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-50S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ25 mm
Max stroke100 mm
Adjustable range50 – 100 mm
Adjuster thread (R)M8×1.25
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM5×0.8 F / M8×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa206 N206 N
0.7 MPa289 N—
Max (@1.0 MPa)42 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-50S

SDAJCompact double-acting cylinder with adjustable stroke.
25Bore size in mm.
×100Maximum stroke length in mm.
-50Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-50S Is Used

precision_manufacturing

Tooling Changeover Stations

Dial the extend stop from 50 to 100 mm via the M8x1.25 screw to accommodate varying part lengths on the fly without swapping cylinders.

science

Trial Positioning Rigs

Fine-tune the extend endpoint during prototype testing, using the built-in magnet and electronic switches to verify the exact stopping point.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-50S the Right Cylinder?

Choose this specific configuration if your application requires frequent on-machine stroke tuning between 50 and 100 mm during setup or tooling changeovers. Confirm the bore, stroke, 50 mm adjustment window, M5x0.8 port, female M5x0.8 rod-end thread, and the -S magnet for sensing. Note that a plain cylinder does not hold its load if air is lost or the valve is centered; the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 50–100 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M8×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-50S FAQ

The theoretical maximum push is 50 kgf at 1.0 MPa.

The external R (M8x1.25) screw shortens the extend stroke by up to 50 mm, allowing on-site tuning between 50 and 100 mm. The -S option adds a built-in piston magnet for AirTAC reed or electronic solid-state switches.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-50S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ25X100-50S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.