
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X75-10B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 65 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X75-10B is a compact double-acting double-rod cylinder featuring an on-site extend stop. An external M8x1.25 adjuster screw lets you dial the forward stroke anywhere between 65 and 75 mm without swapping shims or parts.
This variant utilizes a male M8x1.25 piston rod thread and a short riveted body to minimize axial mounting depth in tight machinery. The unit relies on a fixed NBR bumper to decelerate at the stroke ends rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S option.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X75-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 75 mm |
| Adjustable range | 65 – 75 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 65-75 mm extend stop on a material testing rig to accommodate different sample thicknesses without machining new spacers.
Fine-tune the pusher stroke by up to 10 mm on a packaging line to handle varying carton widths during rapid format changeovers.
When sizing this actuator, evaluate your force needs against its neighbors. Choose this unit if your fixture requires precise 65-75 mm extend tuning during changeovers.
Confirm the 75 mm maximum stroke, 10 mm adjust window, and M5x0.8 air port suit your manifold. The male M8x1.25 rod (-B) works well for threaded attachments, but ensure side loading is minimized. Remember that a plain cylinder drifts when air is lost or the valve centers; the fixed bumper only decelerates near the end of travel and does not lock the load. For suspended loads, integrate an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 50 kgf at 1.0 MPa. Operating pressure spans 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
Turning the M8x1.25 R screw shortens the forward end position by up to 10 mm, giving a usable 65-75 mm range. The screw is a mechanical stop, not a mid-stroke lock. The cylinder will drift if air pressure is lost; use an external rod lock for load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.