
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X75-20B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 55 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X75-20B is a compact double-acting double-rod cylinder featuring an on-site extend stop. An external M8x1.25 adjuster screw lets you dial the forward stroke anywhere between 55 and 75 mm without swapping shims or parts.
This variant features a male M8x1.25 piston rod thread and a 10 mm rod diameter. Its short riveted body significantly reduces axial mounting depth compared to round-body alternatives, fitting easily into tight machine cells. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X75-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 75 mm |
| Adjustable range | 55 – 75 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 55 to 75 mm during machine format changes to precisely set new gripping depths without machining custom spacers.
Fine-tune the pressing position on carton sealing heads to accommodate varying box heights while applying 245.4 N of consistent clamping force.
Iterate on trial actuation endpoints in a lab fixture by turning the M8x1.25 screw, finding the exact contact point before finalizing a design.
Choose this specific 25 mm bore if your setup requires on-site stroke tuning to perfect a final position.
Confirm the 75 mm maximum stroke, 20 mm adjustment window, and M5x0.8 air port. This SKU includes the male M8x1.25 rod thread (-B) but lacks a piston magnet, so it cannot accept reed or electronic switches. Remember that a plain cylinder does not hold position on air loss; the fixed bumper only decelerates near the end and the R screw is a mechanical stop, not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
At 0.7 MPa the push is 343.6 N and the pull is 288.6 N. The theoretical maximum push is 50 kgf at 1.0 MPa.
Turning the external M8x1.25 screw shortens the forward end position by up to 20 mm, yielding a usable extend range of 55 to 75 mm. The retract stroke remains full, and the screw acts purely as a mechanical stop without altering the output force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.