
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X75-40 is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 35 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X75-40 is a compact double-acting double-rod cylinder featuring an external M8x1.25 adjustment screw that dials the extend stop from 35 to 75 mm.
Its short riveted body drastically cuts axial mounting depth where larger profile cylinders cannot fit. End-of-stroke energy is managed by a fixed NBR bumper that decelerates the piston, though it is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic sensing.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X75-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 75 mm |
| Adjustable range | 35 – 75 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 35 to 75 mm via the M8x1.25 screw to match varied jig heights during machine setups, avoiding the need to swap cylinders.
Fine-tune the 35-75 mm end position for trial bends, ensuring the fixed NBR bumper absorbs the end shock while hitting exact material angles.
This model is tailored for operators needing on-site stroke tuning without part changes. Remember that a plain cylinder drifts when air is lost or valves are centered; the fixed bumper and R screw only provide a mechanical stop, not a lock. For secure load holding, integrate an external rod lock or pilot-operated check valve. Confirm your bore, 75 mm max stroke, 40 mm window, M5x0.8 port, female rod thread, and lack of magnet.
Quick checklist
The theoretical maximum push is 50 kgf at 1.0 MPa.
The external screw shortens the extend end-position by up to 40 mm, allowing usable strokes between 35 and 75 mm. It acts purely as a mechanical stop and does not lock the piston mid-stroke; air pressure must be maintained to hold a load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.