
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X75-40B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 35 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X75-40B is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. An external M8x1.25 adjuster screw lets you dial the outward stroke anywhere between 35 and 75 mm, eliminating the need for shims or part swaps during machine commissioning.
This unit ships with a male M8x1.25 piston rod thread (option B) and a 10 mm rod diameter. The short riveted body significantly reduces axial mounting depth, fitting where round-body or profile cylinders cannot. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X75-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 75 mm |
| Adjustable range | 35 – 75 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 35 to 75 mm via the M8x1.25 screw to accommodate different part heights on a machining fixture without machining new spacers.
Iterate rapidly on a test rig by adjusting the outward stop within the 40 mm window, finding the exact 12.5 kg vertical lift point before finalizing the design.
When sizing this 25 mm bore actuator, evaluate your force requirements bidirectionally.
Choose this specific model if your fixture requires frequent changeovers or trial positioning within its 35 to 75 mm extend window. Confirm your setup needs the male M8x1.25 rod thread, the M5x0.8 air port, and operates within the 30-500 mm/s speed range. Remember that a plain cylinder does not hold position on air loss or valve centering; the fixed bumper only decelerates near the end of travel. For suspended or gravity-loaded applications, install an external rod lock or pilot-operated check valve.
Quick checklist
At 0.7 MPa the push increases to 343.6 N and the pull to 288.6 N. The theoretical maximum push is 50 kgf at 1.0 MPa.
Turning the external R (M8x1.25) screw mechanically shortens the extend end position anywhere between 35 and 75 mm. This sets a hard stop and does not alter the force. It is not a mid-stroke lock; the cylinder will drift if air pressure is lost or the valve is centered.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.