
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X75-40S is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 35 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X75-40S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the R (M8x1.25) screw lets you dial the outward stroke down by up to 40 mm directly at the machine, yielding a usable extend range of 35 to 75 mm without swapping shims or parts. Retract remains full length.
This 25 mm bore unit uses a 10 mm piston rod and an M5x0.8 air port. Its short riveted body saves axial mounting depth where a larger profile cylinder will not fit. The -S suffix denotes a built-in piston magnet for AirTAC reed or electronic switches. End shock is absorbed by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X75-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 75 mm |
| Adjustable range | 35 – 75 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 35 to 75 mm during product family changeovers to reposition a 12.5 kg vertical lift clamp without machining new spacers.
Choose this model if your fixture requires frequent changeovers or trial positioning that benefits from on-site stroke tuning.
Confirm the bore (25 mm), maximum stroke (75 mm), adjustment window (40 mm), port (M5x0.8), and the built-in magnet (S). The female rod-end thread is M5x0.8. Note that a plain cylinder does not hold its load if air pressure drops or the valve is centred; the piston drifts. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The R (M8x1.25) screw shortens the extend stop by up to 40 mm, providing a usable extend range of 35 to 75 mm. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.