verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X80-100B

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X80-100B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 80 mm on the machine — no shims, no part change.

  • BoreØ25 mm
  • Max stroke80 mm
  • Adjustable range0–80 mm
  • Adjuster threadM8×1.25
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$43.23 $50.73Save 14% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ25 stroke, mounting and version on one page All SDAJ25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X80-100B

The AirTAC SDAJ25X80-100B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M8x1.25) screw, you can dial the extend end-position anywhere between 0 and 80 mm directly on your machine, eliminating the need for shims or part swaps. Retract remains full length.

Built with a short riveted body, this unit saves axial mounting depth where round-body or profile cylinders will not fit. It uses a 10 mm piston rod with a male M8x1.25 thread end. End shock is handled by a fixed NBR bumper that decelerates the piston, which is not an adjustable air cushion. Note this SKU lacks a piston magnet and cannot take a magnetic switch.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X80-100B Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X80-100B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ25 mm
Max stroke80 mm
Adjustable range0 – 80 mm
Adjuster thread (R)M8×1.25
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM5×0.8 F / M8×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 100 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa206 N206 N
0.7 MPa289 N—
Max (@1.0 MPa)42 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X80-100B

SDAJCompact double-acting cylinder with adjustable stroke.
25Bore size in mm.
×80Maximum stroke length in mm.
-100Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X80-100B Is Used

straighten

Variable Length Gauging

Dial the extend stop from 0 to 80 mm to test multiple part lengths on a single fixture without machining new spacers.

sync_alt

Rapid Changeover Lines

Swap product families quickly by readjusting the R (M8x1.25) screw on the machine, saving axial depth with the riveted body.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X80-100B the Right Cylinder?

Choose this specific configuration if your fixture requires on-site stroke tuning across a wide 0-80 mm window. Confirm your bore, 80 mm stroke, 100 mm adjust window, M5x0.8 port, and male M8x1.25 rod thread. Because a plain cylinder does not hold its load on air loss or valve centring, integrate an external rod lock or pilot-operated check valve if drift is unacceptable.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 0–80 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M8×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X80-100B FAQ

The R (M8x1.25) screw shortens the extend stroke by up to 100 mm, giving a usable extend range of 0-80 mm. This SKU has no -S magnet code, so it cannot accept reed or electronic switches; add the -S option for sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X80-100B

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ25X80-100B and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.