
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X80-40B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 40 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X80-40B is a double-acting compact cylinder featuring an external adjustable extend stop. An M8x1.25 adjuster screw lets you dial the outward stroke down by up to 40 mm, yielding a usable extension range of 40 to 80 mm directly at the machine without swapping parts.
The short riveted body minimizes axial mounting depth where round-body or profile cylinders cannot fit. This specific SKU includes a male-thread M8x1.25 piston rod for direct tooling attachment and lacks a piston magnet, meaning it cannot host reed or electronic switches. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X80-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 80 mm |
| Adjustable range | 40 – 80 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 40 to 80 mm to test multiple part lengths on a single fixture without machining new spacers.
Use the M8x1.25 male rod to mount a contact face and precisely set the mechanical stop distance during initial machine commissioning.
Stepping down to an SDAJ20 yields 157.1 N, while stepping up to an SDAJ32 provides 402.1 N.
Choose this model if your fixture requires frequent changeovers or trial positioning within the 40 to 80 mm window. Confirm your setup needs the male M8x1.25 rod thread, the M5x0.8 air port, and the 40 mm adjustment range. Remember that a plain SDAJ does not hold position if air pressure drops or the valve is centered; integrate an external rod lock or pilot-operated check valve for suspended loads.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push is 50 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa, with a proof pressure of 1.5 MPa, and travels at 30-500 mm/s.
Turning the R (M8x1.25) screw shortens the extend stroke by up to 40 mm, giving an on-site range of 40 to 80 mm. This SKU lacks a piston magnet, so it cannot accept magnetic switches; you would need the -S variant for reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.