
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X85-30B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 55 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X85-30B is a compact double-acting double-rod cylinder featuring an external M8x1.25 adjustment screw. Turning this R thread lets you dial the extend end-position anywhere between 55 and 85 mm directly on your machine, eliminating the need for shims or part swaps.
This variant features a male M8x1.25 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches. The short riveted body drastically reduces axial mounting depth where space is tight. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X85-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 85 mm |
| Adjustable range | 55 – 85 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 55 to 85 mm during machine changeovers to accommodate different fixture heights without machining new spacers.
Establish optimal positioning distances during short-run trials by threading the M8 adjuster, then locking the mechanical stop at the proven distance.
When sizing this 25 mm bore, look at both adjacent options.
Choose this specific model if your assembly line requires frequent on-site stroke tuning across a 30 mm window. It carries the -B option for a male-threaded M8x1.25 rod end and uses an M5x0.8 air port. Remember that a plain cylinder drifts when air is lost or a valve centers, as the fixed bumper only decelerates near the end of travel and never locks the load. For secure holding without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push is 50 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and operating speed is 30-500 mm/s.
The external M8x1.25 screw acts as a mechanical stop that shortens the extend stroke by up to 30 mm, giving a usable range of 55-85 mm. It does not alter the force. This SKU lacks the -S magnet option, so it cannot use reed or electronic switches. The cylinder cannot hold a load on air loss; use an external rod lock for that.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.