
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X85-40B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 45 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X85-40B is a compact double-acting double-rod cylinder featuring an external extend-stop mechanism. By turning the R (M8x1.25) adjuster screw, you shorten the forward stroke on-site across a 45 to 85 mm window without changing parts or shims.
This variant features a male M8x1.25 piston rod thread and lacks a piston magnet, meaning magnetic switches cannot be fitted. The short riveted body minimises axial mounting depth where space is tight. End-of-travel deceleration relies on a fixed NBR bumper rather than an adjustable air cushion, so approach speeds should be managed to avoid shock.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X85-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 85 mm |
| Adjustable range | 45 – 85 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 45 and 85 mm via the M8 screw during prototype runs to find the exact contact point for a 12.5 kg vertical lift without machining new spacers.
Swap product families and reposition the male M8 rod end on-site, using the 40 mm adjustment window to adapt the stroke rapidly instead of swapping the entire cylinder body.
Choose this specific unit when your fixture requires on-site stroke tuning across the 45 to 85 mm range.
Confirm the bore (25 mm), maximum stroke (85 mm), adjustment window (40 mm), and M5x0.8 air port. This SKU includes the -B male M8x1.25 rod thread and no magnet. Remember that the fixed NBR bumper only decelerates the stroke end; a plain cylinder drifts on air loss or valve centring, so fit an external rod lock or pilot-operated check valve for load holding.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
Turning the R (M8x1.25) screw shortens the extend stop from the 85 mm maximum down to 45 mm. The screw acts purely as a mechanical stop and does not alter force or lock mid-stroke; for load holding without live air pressure, you must use an external rod lock or pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.