
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X85-75B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 10 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X85-75B is a double-acting compact cylinder featuring an external adjustable extend stop. An M8x1.25 adjuster screw lets you dial the outward stroke down from the 85 mm maximum to as little as 10 mm directly at the machine, eliminating the need for shims or part swaps during changeovers.
Built with a short riveted body, this unit saves valuable axial mounting depth where a round-body or profile cylinder will not fit. The bore dictates a 10 mm piston rod and a male M8x1.25 thread on this -B variant. End-of-travel deceleration relies on a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X85-75B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 85 mm |
| Adjustable range | 10 – 85 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the push rod position on-site for varying box heights; the fixed NBR bumper absorbs the end shock while the 25 mm bore provides consistent folding pressure.
Sweep the 75 mm adjustment window to find the exact ejection point for a new product run, locking the mechanical stop once the 12.5 kg vertical lift margin is verified.
When sizing this 25 mm bore, evaluate your force needs both ways. Choose this unit if your fixture requires frequent trial positioning or on-site stroke tuning across the 10 to 85 mm window.
Confirm the 85 mm maximum stroke, 75 mm adjustment window, and M5x0.8 air port suit your manifold. The male M8x1.25 rod thread must match your tooling plate. Because a plain cylinder does not hold its load on air loss or when the valve is centred—the piston drifts and the fixed bumper only decelerates near the end—integrate an external rod lock or pilot-operated check valve if you need strict position holding.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
At 0.7 MPa the push increases to 343.6 N. The theoretical maximum push is 50 kgf at 1.0 MPa.
No, this specific SKU does not include a piston magnet and cannot host reed or electronic switches. You would need the -S variant to enable sensing. The M8x1.25 screw only adjusts the extend stop, not mid-stroke sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.