
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X10-10S is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 10 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X10-10S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M10x1.25 adjuster screw lets you dial the extend position on-site from 0 to 10 mm without changing parts.
The short riveted body saves valuable axial mounting depth where round-body or profile cylinders cannot fit. A fixed NBR bumper decelerates the piston at the stroke end, and the built-in -S magnet supports AirTAC reed or electronic solid-state switches for precise end-position sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X10-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 10 mm |
| Adjustable range | 0 – 10 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Use the built-in magnet with an electronic switch to verify position, while the M10x1.25 screw fine-tunes the probe landing distance on varying PCB heights.
Speed up production line changeovers by turning the external adjuster to shift the extend endpoint instantly, avoiding the need to swap out entire cylinders.
Choose this specific model when your fixture requires exact on-machine extend tuning within a tight 0-10 mm window.
Confirm your parameters: 32 mm bore, 10 mm maximum stroke, 10 mm adjust window, PT1/8 port, built-in magnet, and a female M6x1.0 rod-end thread. Remember that a plain cylinder does not hold its load on air loss or when the valve is centered—the piston drifts. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The M10x1.25 screw shortens the extend stop by up to 10 mm, giving a usable extend range of 0-10 mm. The included -S magnet works with AirTAC reed or electronic switches for position sensing, while the fixed NBR bumper decelerates the stroke end.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.